Factory Reset Samsung Galaxy Discover S730M

Factory Reset Samsung Galaxy Discover S730M - Samsung Galaxy Discover comes with 3.5” TFT capacitive touchscreen, that includes 320 x 480 pixels resolution, bit sensitive controls, Multitouch, accelerometer and Proximity device. The phone uses android OS v4.0.4 (Ice Cream Sandwich) that works beside 800 mhz Cortex-A5 processor and 512 MB RAM

Factory Reset Samsung Galaxy Discover S730M

You can reset your Samsung Galaxy Discover S730M to restore your phone and sound settings to the factory default settings. To reset your mobile phone:

1. Press  ➔  and then tap System settings ➔ Back up & reset.


2. Tap Factory data reset. This action erases all data from your device except current system software and bundled applications, or SD card files such as music or photos.


3. Tap Reset phone ➔ Erase everything.

Reset Samsung Galaxy S Relay 4G T699 to Restore Factory Defaults

Reset Samsung Galaxy S Relay 4G T699 to Restore Factory Defaults - If you're one in all the hardware keyboard fans, Samsung Galaxy S Relay 4G are often a decent possibility. It doesn’t solely supply an outsized 4.0” Super AMOLED capacitive touchscreen (480 x 800 pixels resolution), however conjointly includes a slide-out full 5-row qwerty keyboard. The show is provided with Touch-sensitive controls, Multitouch, Gyro detector, accelerometer and Proximity detector.

Reset Samsung Galaxy S Relay 4G T699 to Restore Factory Defaults

You can reset your Samsung Galaxy S Relay 4G T699 to restore the default factory settings. To reset your mobile device, please follow below instructions:

1. Press  ➔  and then tap Settings ➔ Back up and reset.


2. Tap Factory data reset. This action erases all data from your device except current system software and bundled applications, or SD card files such as music or photos. Note: This feature provides an option to format the internal
   USB storage, not the microSD card.


3. Tap Reset device ➔ Delete all.

Download User Manual PDF Free Samsung Aviator Galaxy S SCH-R930

And this (picture below) complete the steps for drawing basic instructions on using the Aviator. Insert the SIM card, open the lid and close it back again, assemble and remove the battery, and power on the phone for the first time.

Download link of User Guide of SCH R930 Galaxy S Aviator we found only in English version.

• Download User Guide of Samsung Galaxy S Aviator Language: Englis

User Manual PDF Free Samsung Exhibit II SGH-T679

All image series that we provide to you below is collected and captured from the " Getting Started " section User Manual Exhibit II 4G . In will help you to assemble the device correctly . How can you open the casing and then remove or assemble the battery to the compartment , how you can incorporate operator T - Mobile SIM card , attach an external microSD memory card , and also how to charge the battery . To read more just go to page 9 to begin to get help on this .

Samsung Exhibit 2 II 4G T679 Manual User Guide T - Mobile Open Back Cover Case Insert Install SIM card Remove the microSD Memor Charging Assemble PDF Download

Free Samsung Exhibit II 4G 2 T679 T - Mobile User Manual - Open Back Case Cover Insert Install SIM card Remove the microSD Memor Charging Assemble - Download PDF

Exhibit 2 SGH T679 manual is available in two language versions : English and Spanish . Here is the link if you want to download and open it via PDF Reader you locally .

• Download User Guide of Samsung Exhibit II 4G T-Mobile | Language: English 
• Download User Guide of Samsung Exhibit II 4G T-Mobile | Language: Spanish 

User Manual PDF Free Samsung Focus S SGH-I937

First of all before you download the User Manual Focus S, let me give you the information that has a connection with the image that we are embedded below. It is about the fact that the internal memory of 16GB SGH i937 is the only storage available in this device. This means that no additional microSD card slot which can be used to expand your storage memory on this phone. That is why a tutorial on how to insert the SIM card, assemble the phone and remove the battery, open the back cover casing compartment and replace it back, and charge the battery as shown in the figure below are not made ​​up tutorial how to install a MicroSD card.

Tutorials as you can see and learn on the above are available on page 9 to page 12 under "Getting Started" section of the User Manual PDF i937. To follow the tutorial carefully and thoroughly, please read directly on the Manual as it is available on the "Read Online" tab or download from the link below.

• Download Samsung Focus S SGH I937 User Manual | Language: English | Page: 175 | PDF Size: 3.11MB

User Manual PDF Free Samsung Focus Flash SGH-I677

Before downloading or reading the User Manual Focus Flash I677, let me explain about the pictures shown below. This is a picture tutorial series to help you to work with the Focus Flash for the first time. Because I677 does not support microSD cards, there is an additional tutorial how to insert the

external storage, but you can learn how to open the case and replace the case cover back cover, how to assemble or remove the battery, how to charge, and also the most important part, how to install SIM card. Please go to page 9 of the PDF UM to get more details on this matter.

Select the appropriate User Manual Focus Flash for you, and choose what fits with your native language. enjoy

• Download User Guide of Samsung Focus SGH-I677 for AT&T language: English
• Download User Guide of Samsung Focus SGH-I677 for AT&T language: Spanish

How To Install Google Services In Nokia Normandy X, X+ and XL

Before You Begin:

• This method is only for Nokia Normandy X, X+ and XL.
• Make sure your device is rooted. Click Here for Rooting method.
• Enable USB Debugging on your device.Click Here if you don’t know how to enable.
• You device must be charged 50% minimum.
• Make a Backup of all your important data stored in device.

Download Required Files:

• Download Root Explorer
• NokiaX_Gapps_KashaMalaga_28.02.2014.zip
• NokiaX_SomeGoogleApps.zip

How To Install Google Services In Nokia Normandy X, X+ and XL:

• Make sure your device is rooted and USB Debugging is enabled.
• Download and Install Root Explorer in your device.
• Now, Extract and Copy all apks from NokiaX_Gapps_KashaMalaga_28.02.2014.zip to /system/app.
• Change Permissions of all this copied files as shown in picture:

• After changing the permissions of all this files, reboot your device.
• After reboot, Extract all files from NokiaX_SomeGoogleApps.zip and install apps normally.

That's it!! Congrats Google services are successfully installed in your Nokia Android smartphone.

Root Nokia X, X+ and XL using Framaroot

These are the instructions to root Nokia X, X+ and XL using Framaroot Application on Phone itself (does not require computer).

Requirements: Your Nokia X, X+ and XL smartphone should have at-least 10-20 percent of phone battery to perform the rooting process.

Root Nokia X, X+ and XL using Framaroot

Step 1: Enable installation of 3 party Apps on your Nokia X, X+ and XL. To Enable, Open Settings > Security > Device Administration >Unknown Sources (tick to enable it).

Step 2: Download and install Framaroot Application on your Nokia X, X+ and XL smartphone. Once installation is completed you will be able to see the Framaroot Icon in the App Menu.

Step 3: Now, Tap on the Framaroot App Icon to Open it.

Step 4: Once Framaroot Application is launched you will be able to see the following screen on your Device:

Step 5: In Framaroot, You will be able to see 2 options i.e Aragorn and Gandalf. Tap on the Gandalf Option.

Step 6: Now, you will be able to see the Framaroot success Message on the Phone Screen.

Step 7: Now, you have to restart your Device.
Step 7: Now your Nokia X, X+ and XL smartphone is Rooted. To check whether your phone is rooted correctly, open Applications Menu, there you will be able to see a new app installed, called SuperSU. If this app exist then it means you have successfully rooted your device.

Optional: You can also verify that your device is successfully rooted or not by Root Checker Application.

Keep in Mind:
[*] No data loss process: Your Nokia X, X+ and XL Phone Data like contacts, pictures, videos, music and etc will be not affected with this method.
[*] Device Warranty: Once you full unroot your device through SuperSU, you can claim for the phone warranty. In short no need to worry for phone warranty.
[*] How to unroot: To unroot, Open SuperSU > Settings > Full Unroot.
[*] Credits: Framaroot Application is developed by alephzain (XDA Developer).

Update Galaxy Grand Duos I9082 with Android 4.2.2 XXUBNA5 Jelly Bean Official Firmware

How to Update Galaxy Grand Duos I9082 with Android 4.2.2 XXUBNA5 Jelly Bean Official Firmware-Samsung Galaxy Grand with Dual SIM card slot also known as Galaxy Grand Duos (GT-I9082) has just received the latest Android 4.2.2 Jelly Bean update with firmware build number I9082XXUBNA5. The new official firmware is currently available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details

1. PDA: I9082XXUBNA5
2. CSC: I9082OJVBNA2
3. MODEM: I9082XXUBNA2 
4. Version: Android 4.2.2
5. Build date: Jan 22, 2014
6. Regions: Iraq, Algeria, Afghanistan, Egypt, Iran, Kenya, Morocco, Pakistan, Saudi Arabia, South Africa, Turkey, Tunisia, United Arab Emirates

Samsung Galaxy Grand Duos I9082 users who missed the OTA update notification or unable to access the update over Samsung KIES, can now download and install the same manually using our step-by-step guide.

Pre-requisites

1. Install USB Drivers for Samsung Galaxy Grand Duos on the computer.

2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. The Galaxy Grand Duos should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the phone is charged more than 80 percent.

6. The Android 4.2.2 XXUBNA5 Jelly Bean firmware is compatible only with the Galaxy Grand Duos (GT-I9082). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Grand Duos by navigating to Settings >> About Phone.

Files Required

1. Android 4.2.2 XXUBNA5 Jelly Bean Firmware (Mirror Link) for Galaxy Grand Duos I9082

2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Grand Duos I9082 with Android 4.2.2 XXUBNA5 Jelly Bean Firmware 

• Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
• Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
  Switch off the Galaxy Grand Duos.
• Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
• Run Odin on the computer as an Administrator.
• Connect the Galaxy Grand Duos to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

• Select the following files in Odin from extracted I9082XXUBNA5 firmware folder:

1. Click the PDA button and select the .tar.md5 file.
2. Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
3. Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
4. Click the PIT button and select the .pit file. Ignore if there is no such file.

• In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
• Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.
• Once the installation process completes, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.

Samsung Galaxy Grand Duos I9082 should be now updated with Android 4.2.2 XXUBNA5 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Grand Duos I9082 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Update Galaxy Tab 3 7.0 SM-T211 with Android 4.1.2 XXANA4 JB Official Firmware

How To Update Galaxy Tab 3 7.0 SM-T211 with Android 4.1.2 XXANA4 JB Official Firmware-Samsung Galaxy Tab 3 7.0 with 3G connectivity has received a new Android 4.1.2 Jelly Bean update with base firmware T211XXANA4. The new official firmware is now available as an Over-The-Air (OTA) update as well as through Samsung KIES.

Firmware details

• PDA: T211XXANA4
• CSC: T211ODDANA2
• MODEM: T211XXANA2
• Version: Android 4.1.2
• Build date: Jan 16, 2013
• Regions: India, Bangladesh, Nepal, Sri Lanka

Samsung Galaxy Tab 3 7.0 SM-T211 users who missed the OTA update notification or unable to access the update over Samsung KIES, may follow our step-by-step guide to install the update manually.

Pre-requisites

1. Install USB Drivers for Samsung Galaxy Tab 3 7.0 on the computer.

2. Enable USB Debugging Mode on your tablet by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. The Galaxy Tab 3 7.0 should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the tablet is charged more than 80 percent.

6. The Android 4.1.2 XXANA4 Jelly Bean firmware is compatible only with the 3G + Wi-Fi version of Galaxy Tab 3 7.0 (SM-T211). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Tab 3 7.0 by navigating to Settings >> About Phone.

Files Required

1. Android 4.1.2 XXANA4 Jelly Bean Firmware (Mirror Link) for Galaxy Tab 3 7.0 SM-T211

2. Odin 3.07 (Mirror Link)

Steps to Update Galaxy Tab 3 7.0 SM-T211 with Android 4.1.2 XXANA4 Jelly Bean Firmware 

• Extract Firmware zip file using WinRAR/7-Zip/WinZip or any other extracting tool, you will get a .tar.md5 file and some other files (optional).
• Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.
• Switch off Galaxy Tab 3 7.0.
• Boot the device into Download Mode by pressing and holding Volume Down, Homeand Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
• Run Odin on the computer as an Administrator.
• Connect the Galaxy Tab 3 7.0 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

• Select the following files in Odin from extracted T211XXANA4 firmware folder:

1. Click the PDA button and select the .tar.md5 file.
2. Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
3. Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
4. Click the PIT button and select the .pit file. Ignore if there is no such file.

• In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.
• Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.
• Once the installation process is completed, your device will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your tablet from the computer.

• Samsung Galaxy Tab 3 7.0 SM-T211 should be now updated with the Android 4.1.2 XXANA4 Jelly Bean official firmware. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Tab 3 7.0 SM-T211 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.