How to Update Galaxy Young GT-S6310L To UBAMI1 4.1.2 JB Official ROM

Samsung Galaxy GT-S6310L Young (Latin) users can easily update their devices to Android 4.1.2 official firmware UBAMI1 Jelly Bean. Samsung has just released an OTA update of the firmware. S6310LUBAMI1 latest firmware build version. The Galaxy Young was released in February of this year with Android 4.1.2 Jelly Bean. Samsung has not released the Android 4.2.2 version of android Jelly Bean or more for the device. If you already have the tools and the latest firmware is not updated, the latest firmware update using our simple tutorial below. You can check the latest available firmware for your device via OTA (over the air) from 

Settings-About Phone-Software Update.

Because Young Galaxy has been running on Android 4.1.2 Jelly Bean, you can only expect a slight bug fixes and performance enhancements with this update. So, want to update to the latest S6310L Galaxy Young UBAMI1 Jelly Bean Android 4.1.2 firmware? To install the official way, either you can go for the OTA update as mentioned above or download the firmware via Kies theSamsung utility. However, most of us prefer the manual way to update the official firmware. So, in this article you will enjoy the step-by-step user guide for the Android 4.1.2 update UBAMI1 latest firmware on your Galaxy Young S6310L via Odin.

Important Note:

"The firmware is released only for the Samsung Galaxy Young GT-S6310L model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Youngdows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".

Android 4.1.2 Jelly Bean S6310LUBAMI1 Official Firmware Download List

Samsung rolled out the firmware for the following countries. The firmware which are unbranded or not locked to any carrier, no matter of which country or region, can be flashed on any Galaxy Young GT-S6310L model.

Colombia: CGU-S6310LUBAMI1-20130930102918.zip

[Firmware for rest of the countries and carrier will be added here when available]

Previous Firmware Build

Venezuela: VMT-S6310LUBAMH1-20130922124220.zip

Chile (Entel PCS): CHE-S6310LUBAMH1-20131028113446.zip

Pre-Requisites:

Check battery percentage, your device should have at least 60% battery power

Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging

Backup important data and settings to external storage- follow this guide

Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be Noted:

• If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
• Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
• After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.

All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 S6310LUBAMI1 official firmware on Galaxy Young S6310L.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Young S6310L through Odin:

1. Download Android 4.1.2 UBAMI1 Firmware for Galaxy Young S6310L from the above list
2. Download Odin 3.07
3. Switch off your phone and boot Galaxy Young S6310L into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
5. Now connect your Galaxy Young S6310L to your computer via USB cable
6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: S6310LXXDLJ5_S6310LODDDLI7_INU.tar.md5)
10. Now, click on the Start button to begin the installation process, wait few moments.
11. Once completed, you would see “PASS!” message in ID:COM port having green background
12. Your phone should automatically reboot after completion
13. You can now disconnect your phone from computer
14. Finish

Congrats! you complete the tutorial for Android 4.1.2 official firmware update Jelly Bean on Galaxy GT-S6310L young. Hope you managed to do the update process. If you've followed everything in the tutorial as mentioned above, then you should now young Galaxy runs on the latest Android 4.1.2 Jelly Bean build UBAMI1 version. You can confirm the details of the firmware update from Settings-About Phone. If you are stuck in a point or find any problems with the download link, then please do not hesitate to contact with us using the comment form below.