Monday, 13 January 2014

How to Install E270SKSUAMJ1 4.1.2 Jelly Bean Firmware for SHVE270S Galaxy Grand

For Samsung SHV-E270S Galaxy Grand (South Korea) users can update their devices to the latest Android 4.1.2 official firmware KSUAMJ1 Jelly Bean. Samsung has just launched the firmware. E270SKSUAMJ1 latest firmware build version. The Galaxy Grand is a good low-budgeted feature for Galaxy Smartphones by Samsung, released with Android 4.1.2 Jelly Bean. The device has received the Jelly Bean Android 4.1.2 official firmware updates regularly and this is the latest firmware available. If you have not yet updated the device and the latest firmware, then update your device using our simple tutorial below. You can check for the latest firmware available for your device via OTA (over the air) from Settings-About Phone-Software Update.

As Grand E270S Galaxy already running on Android 4.1.2 Jelly Bean, you can only expect a few bug fixes and performance improvements with this latest update. So, want to update to the latest E270S Galaxy Grand KSUAMJ1 Jelly Bean Android 4.1.2 firmware? To install the official way, either you can go for the OTA update as mentioned above or download the firmware via Samsung Kies utility for. However, most of us prefer the manual way to update the official firmware. So, in this article you will find step by step user guide for the Android 4.1.2 update KSUAMJ1 latest firmware on your Galaxy Grand E270S via Odin.


Important Note:

"The firmware is released only for the Samsung Galaxy Grand SHV-E270S model, so don’t try this in any other android device. Check your device model number from Settings-About Phone. Also the tutorial is based on Granddows PC. Follow all the pre-requisites, procedures and steps carefully to avoid breaking your phone".Android 4.1.2 
Jelly Bean E270SKSUAMJ1 Official Firmware Download List
Pre-Requisites:
  • Check battery percentage, your device should have at least 60% battery power
  • Turn on USB Debugging mode, go to Settings-Developer Options-USB Debugging
  • Backup important data and settings to external storage follow this guide
  • Install USB driver for your device on your computer- Download Samsung USB Driver

Points to be noted:
  • If you are using any Custom ROM such as- CyanogenMod, Paranoid Android, AOKP, SLIM ROMs etc, then it’ll replaced by this official Stock ROM
  • Custom Recovery (CWM or TWRP Recovery) will be replaced by Stock Recovery
  • After flashing official firmware, your device will no longer belongs to rooted device. However you can root your device any time after flashing the firmware.
All the above pre-requisites are very important and must follow before proceed to installation guide. Hope you get all the above points. Now, go through the below tutorial to install Android 4.1.2 E270SKSUAMJ1 official firmware on Galaxy Grand E270S.

How to Install Android 4.1.2 Jelly Bean Official Firmware on Galaxy Grand E270S through Odin:


  1. Download Android 4.1.2 KSUAMJ1 Firmware for Galaxy Grand E270S from the above list
  2. Download Odin 3.07
  3. Switch off your phone and boot Galaxy Grand E270S into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
  4. Extract the downloaded Odin3.07 zip file and run the Odin3 v3.07.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
  5. Now connect your Galaxy Grand E270S to your computer via USB cable
  6. In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
  7. Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
  8. Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension.tar.md5
  9. In Odin screen, click on PDA button and select the firmware file with .tar.md5 extension(The firmware file look something like: E270SXXDLJ5_E270SODDDLI7_INU.tar.md5)
  10. Now, click on the Start button to begin the installation process, wait few moments.
  11. Once completed, you would see “PASS!” message in ID:COM port having green background
  12. Your phone should automatically reboot after completion
  13. You can now disconnect your phone from computer
  14. Finish
Congrats! You have completed the tutorial for Android 4.1.2 firmware update is officially Jelly Bean on SHV-E270S Galaxy Grand. Hope you managed to do the update process. If you follow everything as mentioned in the tutorial above, then your Galaxy Grand now be running on the latest Android 4.1.2 Jelly Bean build KSUAMJ1 version. You can confirm the details of the firmware update from Settings-About Phone. If you get stuck in a spot or find a problem with the download link, then please do not hesitate to contact with us using the comment form below.

No comments:

Post a Comment