Samsung has recently launched Android 4.3 Jelly Bean to update its firmware with the firmware build number N7105XXUEMK5 for LTE version of the Galaxy Note 2 (GT-N7105). The new official firmware and is currently available as an Over-The-Air (OTA) update via Samsung Kies as well.
Samsung Galaxy Note 2 (LTE) N7105 users who have updated their devices with Android 4.3 Jelly Bean, the device can eradicate them back easily using the tutorial below we provide to visitors dear wherever you are right now
Well at this time in our tutorial using CF-Auto-Root file released by XDA-Developers Recognized Elite, Chainfire. File CF-Root-Auto that it is very possible Galaxy Note 2 users to root their devices easily without depending on the firmware. It was really supports Android 4.3 Jelly Bean and the firmware of your future as well. Head to the main thread CF-Auto-Root to learn more about the root method. sila look at it in the paragraphs below ni...
Disclaimer: Rooting voids the warranty of your device. We and the developer of this rooting procedures shall not be held responsible if any undesirable outcomes may happen to your device. use of this root guide is solely at your own risk!
Pre-requisites
1. Install USB Driver for Samsung Galaxy Note 2 on the computer.
2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.
3. Make a backup of all your important data before following the guide.
4. The Galaxy Note 2 should be factory unlocked and not locked to any particular carrier.
5. Ensure the battery of the phone is charged more than 80 percent.
6. The CF-Auto-Root file works only on the LTE version of Samsung Galaxy Note 2 (N7105). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 2 by navigating to Settings >> About Phone.
File Required
1. CF-Auto-Root for Galaxy Note 2 (LTE) N7105 (CF-Auto-Root-t0lte-t0ltexx-gtn7105.zip)
2. Odin 3.07
Steps to Root Galaxy Note 2 (LTE) N7105 Running on Android 4.3 Jelly Bean Firmware
Step 1: Extract CF-Auto-Root and Odin 3.07 files using winrar/7zip/winzip or any other extracting tool.
Step 2: Switch off the Galaxy Note 2. Then boot the device into Download Mode by pressing and holding Volume Down, Home and Power buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.
Step 3: Launch Odin on the computer as an Administrator.
Step 4: Connect the Galaxy Note 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.
Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.
Step 5: In Odin, click the PDA button and select the CF-Auto-Root-t0lte-t0ltexx-gtn7105.tar.md5 file.
Step 6: Verify that Auto Reboot and F. Reset Time checkboxes are selected in Odin. Also, ensure the Re-Partition option is NOT selected.
Step 7: Double-check and click Start button in Odin. The installation process will now begin.
Step 8: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect your device from the computer.
Samsung Galaxy Note 2 (LTE) N7105 running on Android 4.3 Jelly Bean firmware is now rooted successfully. You can now install any app that requires root permission. Verify the root status of the device by downloading Root Checker app from Google Play Store.
Thank's to all fellas at XDA who first tried out this rooting technique. This method was originally posted via XDA-Developers original thread.
No comments:
Post a Comment