How to Update Galaxy Note 2 with ease (LTE) N7105 with Android 4.3 Jelly Bean Official Firmware XXUEMK9

How to Update Galaxy Note 2-Hi mate Samsung Galaxy Note 2 with LTE connections (GT-N7105) has received an update to Android 4.3 Jelly Bean firmware XXUEMK9 base. The new official firmware is now available in Germany as Over-The-Air (OTA) update via Samsung Kies and.

Detailed firmware

1. PDA: N7105XXUEMK9
2. CSC: N7105DBTEMK1
3. MODEM: N7105XXUEMJ9
4. Version: Android 4.3
5. Build date: November 20, 2013
6. Regions: Germany

Samsung Galaxy Note 2 (LTE) N7105 users who missed the OTA update notification or not able to access the update via Samsung Kies, and those residing outside Germany Now you can download and install the same manually, using step-by-step guide we provide here 

The following are the steps that we present to readers honored....

Pre-requisites

1. Install USB Drivers for Samsung Galaxy Note 2 on the computer.

2. Enable USB Debugging Mode on the phone by navigating to Settings >> Developer Options.

3. Make a backup of all your important data before following the guide.

4. The Galaxy Note 2 should be factory unlocked and not locked to any particular carrier.

5. Ensure the battery of the phone is charged more than 80 percent.

6. The Android 4.3 XXUEMK9 Jelly Bean firmware is compatible only with the LTE version of Samsung Galaxy Note 2 (GT-N7105). Applying this to any incorrect variant might brick the device. Verify the model number of the Galaxy Note 2 by navigating to Settings >> About Phone.

Files Required

1. Android 4.3 XXUEMK9 Jelly Bean Firmware for Galaxy Note 2 (LTE) N7105

2. Odin 3.07

Steps to Update Galaxy Note 2 (LTE) N7105 with Android 4.3 XXUEMK9 Jelly Bean Firmware 

Step 1: Extract Firmware zip file using winrar/7zip/winzip or any other extracting tool, you will get a .tar.md5 file and some other files.

Step 2: Extract Odin zip file and you will get Odin3 v3.07.exe along with few other files.

Step 3: Switch off the Galaxy Note 2.

Step 4: Boot the device into Download Mode by pressing and holding Volume Down andPower buttons together until a construction Android robot icon with a warning triangle appears on screen. Now press the Volume Up button to enter Download Mode.

Step 5: Run Odin on the computer as an Administrator.

Step 6: Connect the Galaxy Note 2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the device is connected successfully, the ID: COM box will turn to light blue with the COM port number. Additionally, the successful connected will be indicated by a message saying Added.

Note: If the Added message does not appear, then try re-install USB drivers or changing the port on the computer.

Step 7: Select the following files in Odin from extracted N7105XXUEMK9 firmware folder:

• Click the PDA button and select the .tar.md5 file.
• Click the Phone button and select file with MODEM in its name. Ignore if there is no such file.
• Click the CSC button and select file with CSC in its name. Ignore if there is no such file.
• Click the PIT button and select the .pit file. Ignore if there is no such file.

Step 8: In Odin, enable Auto Reboot and F. Reset Time checkboxes. Also, ensure the Re-Partition checkbox is chosen only if a .pit file was chosen in the previous step.

Step 9: Verify everything suggested in Step 7 and Step 8 is done correctly. Then hit the Startbutton to begin the installation process.

Step 10: Once the installation process is completed, your phone will restart and soon you will see a PASS message with green background in the left-most box at the very top of the Odin. You can now unplug the USB cable to disconnect it from the computer.

Samsung Galaxy Note 2 (LTE) N7105 should be now updated with official Android 4.3 XXUEMK9 Jelly Bean. Head over to Settings >> About Phone to verify the software version running on the device.

Note: If Galaxy Note 2 (LTE) N7105 stuck at booting animation after Step 10 then go to recovery mode (press and hold the Volume Up and Power buttons together) and perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option. Please note, performing wiping task will erase your device internal memory data and not external SD card data.

Thanks for following the above alloy is good and right........